Built right into OS X Lion, Lion Recovery lets you repair disks or reinstall OS X Lion without the need for a physical disc. The Lion Recovery Disk Assistant lets you create Lion Recovery on an external drive that has all of the same capabilities...
Win32 Disk Imager For Mac
It can take a while to write an image to an SD card, depending on the card speed as well as the size of the disk image. In my testing when writing a 30 GB RetroPie .img disk image file to a 32 GB SD card for use with a CanaKit RaspberryPi, the entire process of writing the image and then validating the SD card took about 1.5 hours, but your mileage may vary.
Win32 Disk Imager is free software that allows you to write a RAW disk image in Windows to a USB flash drive, DVD, or CD. It then allows you to back up these removable devices to an image file. The software is fully open source, and the current version supports Windows 10/8/7.
EaseUS Todo Backup Free is a backup and recovery software with a trial version that gives you access to many advanced features. As the best Win32 Disk Imager alternative, this tool allows you to back up disks, partitions, personal files, and folders.
Final Verdict: EaseUS Todo Backup Free is the best alternative to Win32 Disk Imager because of its free 250GB cloud storage service and the ability to create a WinPE bootable disk for your image files.
balenaEtcher is an open-source image burner that you can use on Windows, Linux, and macOS devices. As the best Win32 disk imager alternative, this software fastens the process of burning images on SD cards and USB drives.
Final Verdict: Acronis True Image is among the five best alternatives for Win32 Disk Imager because it supports several platforms, including Mac, Windows, iPhone, Web, and Android. It's also suitable for disk cloning and partition management.
If fed up with the shortcomings of the Win32 Disk Imager, we have a better alternative for you! EaseUS Todo Backup Free (the best overall alternative) has unique features allowing you to create disk images and backup files seamlessly.
This software allows you to perform bootable backup and recovery using a WinPE bootable disk. It also allows you to create a new and identical hard drive for your device through disk cloning. The software also enables you to restore system backup images between computers of dissimilar hardware.
To get started with EaseUs Todo Backup Free as a disk imaging alternative, you'll need to download and install a free software version on your computer. The disk imaging steps using this software are simple and easy to follow. You should therefore try to use it as an alternative to Win32 Disk Imager.
This software effectively creates disk images and allows you to perform disk cloning, partition resizing, and bootable backup and recovery using a WinPE bootable disk. After creating a disk image using EaseUS Todo Backup Free, you can back it up to your local hard drive, NAS, and more.
Download Disk Imager 1.0 for Mac from our website for free. The most popular version among the program users is 1.0. This software for Mac OS X is an intellectual property of Family Friendly Software. The software lies within System Tools, more precisely File Managers. The unique ID for this application's bundle is com.FamilyFriendlySoftware.DiskImager. The application's installer is commonly called disk_imager.dmg.
Disk Imager allows you to create disk images from folders with customized file system formats, custom volume names, AES-128 bit encryption, and your choice of a few different disk image formats. With Disk Imager you can retrieve very detailed information, displayed in textual format, about any disk image.
Linux distributions running GNOME can easily make a live CD through nautilus and gnome-disk-utility. Simply right-click on the .iso file, and select Open With Disk Image Writer. When GNOME Disk Utility opens, specify the flash drive from the Destination drop-down menu and click Start Restoring.
win32diskimager is another graphical USB iso writing tool for Windows. Simply select your iso image and the target USB drive letter (you may have to format it first to assign it a drive letter), and click Write.
Your USB device will appear as something like /dev/disk2 (external, physical). Verify that this is the device you want to erase by checking its name and size and then use its identifier for the commands below instead of /dev/diskX.
This command will run silently. To view progress, send SIGINFO by pressing Ctrl+t. Note diskX here should not include the s1 suffix, or else the USB device will only be bootable in UEFI mode and not legacy. After completion, macOS may complain that "The disk you inserted was not readable by this computer". Select 'Ignore'. The USB device will be bootable.
Ventoy is an open source tool to create bootable USB drive for ISO/WIM/IMG/VHD(x)/EFI files. With ventoy, you do not need to format the disk over and over, you just need to copy the ISO/WIM/IMG/VHD(x)EFI files to the USB drive and boot them directly. You can copy many files at a time and ventoy will give you a boot menu to select them. It is available as ventoy-binAUR.
This method uses Syslinux and a Ramdisk (MEMDISK) to load the entire Arch Linux ISO image into RAM. Since this will be running entirely from system memory, you will need to make sure the system you will be installing this on has an adequate amount. A minimum amount of RAM between 500 MB and 1 GB should suffice for a MEMDISK based, Arch Linux install.
To create your own SD Card for the Raspberry Pi you will need access to another machine, or a friend with one. You will need to be careful, as you could corrupt the disk on that machine if you do things wrong (although it is not hard to do it right, and NOOBS makes it impossible to go wrong). If you are lucky, you might find a local Raspberry Pi or Linux group who will offer to load your card for you.
Pi Filler is a simple tool for copying a Raspberry Pi operating system image file to an SD card, or restoring an SD card backup created by Pi Copier. Version 1.3 is about 5x faster than previous versions and can write a full card in 5-7 minutes. Pi Filler automatically identfies your SD card (and asks for confirmation to prevent any chance of the wrong disk being written to), and shows estimated time remaining during the copy. After it's done, if your Raspberry Pi is not connected to a display, you can use Pi Finder to locate it on your network and log in from Terminal. These utilities are written in AppleScript and Bash, are compatible with OS X 10.6 Snow Leopard through 10.12 Sierra, and include source code.
The new ApplePi-Baker v2 is a free utility that allows you to create a NOOBS SD, write an IMG file to SD card, or backup an SD card to IMG, with only a few simple clicks. This is a closed source application. The so called sudo password, unlike all other applications, is no longer needed (developed per Apple's security guidelines with Privileged Helper). The application is written in Lazarus Pascal, 64 bits, signed and supports Retina. The latest version (2.0.0) has been tested and is compatible with the latest macOS version (at this time: Mojave 10.14.4). Some of the new features are; pretty much any compression format is supported, sizes are properly checked before writing to disk, optional enabling of SSH after restore, optional auto eject, and writing to multiple disks in one restore.
PiWriter is a simple wizard made using shell scripts, PlatyPus and CocoaDialog. To prevent users from making mistakes the wizard auto-detect's the SD card you plan to use and prevents you from selecting your system disk. Also there is no need for a root password so even less damage can be done. The nextgen PiWriter2 introduces a new 'drag and drop' approach and also includes a backup feature. PiWriter 1.0.4 does not work on Mac OS X Mavericks. Nor does it work on OS X Yosemite, 10.10.5.
Etcher is a cross-platform disk image flasher (Win/Mac/Linux), that prevents you from overwriting your system disk by accident, verifies the written SD card image, and can also flash directly from compressed formats such as ".zip", ".gz", ".bz2", ".xz". Download the operating system package from the raspberrypi.org downloads page or from a mirror or torrent. Insert an SD card into your computer. Starting Etcher, select the operating system package you've got. Etcher tries to auto-select your SD card drive. If you have multiple drives that can be written to, choose manually the one that corresponds to your SD card. Start flashing after entering the sudo password. The image written to your card will be verified afterwards.
1. Insert the SD card in your PC using a USB or built-in card reader. Now open a Terminal window, and enter the command sudo fdisk -l. This will list all the filesystems present on your system.2. Try to find out the device name of your SD card. I have a 16GB SD card, so it is easily identified as the device /dev/sdb which has a size of 14.9GB. This is because the actual storage on a device is always slightly lower than advertised. Note down this device name.3. Use the dd command to write the image to your hard disk. For example:sudo dd if=/dev/sdb of=/raspbian_backup.img 2ff7e9595c
Comments